| 2012 Integra Specifications |
| Engine |
| Type |
Liquid-cooled 4-stroke 8-valve, SOHC parallel 2-cylinder |
| Displacement |
670cm3 |
| Bore × Stroke |
73 × 80mm |
| Compression Ratio |
10.7 : 1 |
| Max. Power Output |
38.1kW/6,250min-1 (95/1/EC) |
| Max. Torque |
62Nm/4,750min-1 (95/1/EC) |
| Fuel System |
| Carburation |
PGM-FI electronic fuel injection |
| Throttle Bore |
36 mm |
| Aircleaner |
5.8 litres |
| Fuel Tank Capacity |
14.1 litres |
| Fuel Consumption |
16.3 km/l (46mpg) - WMTC in D-Mode |
| Electrical System |
| Ignition System |
Computer-controlled digital transistorised with
electronic advance |
| Ignition Timing |
12° BTDC (idle) 〜 53.9° BTDC (6,600min-1) |
| Sparkplug Type |
IFR6G-11K |
| Starter |
Electric |
| Battery Capacity |
12V-11AH |
| Headlight |
12V; 60W × 1 (High) / 55W × 1 (Low) |
| Drivetrain |
| Clutch |
Wet, multiplate hydraulic 2-clutch |
| Clutch Operation |
D mode/S mode/Manual mode |
| Transmission Type |
6-speed Dual Clutch Transmission |
| Primary Reduction |
1.921 |
| Gear Ratios |
1 |
2.666 |
| 2 |
1.904 |
| 3 |
1.454 |
| 4 |
1.200 |
| 5 |
1.033 |
| 6 |
0.837 |
| Final Reduction |
2.437 |
| Final Drive |
Chain |
| Frame |
| Type |
Diamond; steel pipe |
| Chassis |
| Dimensions (L×W×H) |
2,195mm × 790mm × 1,440mm |
| Wheelbase |
1,525mm |
| Caster Angle |
27° |
| Trail |
110mm |
| Steering Turn Angle |
35° |
| Seat Height |
790mm |
| Ground Clearance |
135mm (minimum) |
| Kerb Weight |
238kg |
| Max. Carrying Capacity |
195kg |
| Suspension |
| Type |
Front |
41mm telescopic fork, 120mm travel |
| Rear |
Monoshock damper, Pro-Link swingarm, 120mm travel |
| Wheels |
| Type |
Front |
multi-spoke cast aluminium |
| Rear |
multi-spoke cast aluminium |
| Rim Size |
Front |
17M/C × MT 3.50 |
| Rear |
17M/C × MT 4.50 |
| Tyre Size |
Front |
120/70-ZR17M/C（58W） |
| Rear |
160/60-ZR17M/C（69W） |
| Tyre Pressure |
Front |
250kPa |
| Rear |
290kPa |
| Brakes |
| Type |
Front |
320mm single wavy hydraulic disc with 3-piston calipers and sintered metal
pads,
ABS/CBS as standard |
| Rear |
240mm single wavy hydraulic disc with single-piston caliper and sintered metal
pads, ABS/CBS as standard |
| All specifications are
provisional and subject to change without notice. |
